CL Command Reference - LODOPTFMW
CL Command List > LODOPTFMW Reference
Description:
The Load Optical Firmware (LODOPTFMW) command loads optical device firmware into a staging area that can be accessed by the Optical Hardware Service Manager. The Optical Hardware Service Manager must be used to load the firmware onto the device.
Restrictions:
1. This command is shipped with *EXCLUDE public authority.
2. You must have an active optical device although it does not need to be the destination device for the firmware. The system will find the varied on device.
Examples:
Example 1: Specify a Media Library
LODOPTFMW FROMSTMF(¡¯/MyDir/MyFile¡¯) TYPE(399F) MODEL(200)
This command loads the optical device firmware from MyFile into system storage for a 399F Optical Media Library Model 200.
Example 2: Specify an Optical Drive
LODOPTFMW FROMSTMF(¡¯/MyDir/MyFile¡¯) TYPE(399F) MODEL(001)
This command loads the optical device firmware from MyFile into system storage for a 14x optical drive.